php-beanstalkd消息队列类实例分享 本文实例为大家分享了php beanstalkd消息队列类的具体代码，供大家参考，具体内容如下 true, 'host' => '127.0.0.1', 'port' => 11300, 'timeout' => 1, 'logger' => null ]; $this->_config = $config + $defaults; } /** * Destructor, disconnects from the server. * * @return void */ public function __destruct() { $this->disconnect(); } /** * Initiates a socket connection to the beanstalk server. The resulting * stream will not have any timeout set on it. Which means it can wait * an unlimited amount of time until a packet becomes available. This * is required for doing blocking reads. * * @see \Beanstalk\Client::$_connection * @see \Beanstalk\Client::reserve() * @return boolean `true` if the connection was established, `false` otherwise. */ public function connect() { if (isset($this->_connection)) { $this->disconnect(); } $errNum = ''; $errStr = ''; $function = $this->_config['persistent'] ? 'pfsockopen' : 'fsockopen'; $params = [$this->_config['host'], $this->_config['port'], &$errNum, &$errStr]; if ($this->_config['timeout']) { $params[] = $this->_config['timeout']; } $this->_connection = @call_user_func_array($function, $params); if (!empty($errNum) || !empty($errStr)) { $this->_error("{$errNum}: {$errStr}"); } $this->connected = is_resource($this->_connection); if ($this->connected) { stream_set_timeout($this->_connection, -1); } return $this->connected; } /** * Closes the connection to the beanstalk server by first signaling * that we want to quit then actually closing the socket connection. * * @return boolean `true` if diconnecting was successful. */ public function disconnect() { if (!is_resource($this->_connection)) { $this->connected = false; } else { $this->_write('quit'); $this->connected = !fclose($this->_connection); if (!$this->connected) { $this->_connection = null; } } return !$this->connected; } /** * Pushes an error message to the logger, when one is configured. * * @param string $message The error message. * @return void */ protected function _error($message) { if ($this->_config['logger']) { $this->_config['logger']->error($message); } } public function errors() { return $this->_config['logger']; } /** * Writes a packet to the socket. Prior to writing to the socket will * check for availability of the connection. * * @param string $data * @return integer|boolean number of written bytes or `false` on error. */ protected function _write($data) { if (!$this->connected) { $message = 'No connecting found while writing data to socket.'; throw new RuntimeException($message); } $data .= "\r\n"; return fwrite($this->_connection, $data, strlen($data)); } /** * Reads a packet from the socket. Prior to reading from the socket * will check for availability of the connection. * * @param integer $length Number of bytes to read. * @return string|boolean Data or `false` on error. */ protected function _read($length = null) { if (!$this->connected) { $message = 'No connection found while reading data from socket.'; throw new RuntimeException($message); } if ($length) { if (feof($this->_connection)) { return false; } $data = stream_get_contents($this->_connection, $length + 2); $meta = stream_get_meta_data($this->_connection); if ($meta['timed_out']) { $message = 'Connection timed out while reading data from socket.'; throw new RuntimeException($message); } $packet = rtrim($data, "\r\n"); } else { $packet = stream_get_line($this->_connection, 16384, "\r\n"); } return $packet; } /* Producer Commands */ /** * The `put` command is for any process that wants to insert a job into the queue. * * @param integer $pri Jobs with smaller priority values will be scheduled * before jobs with larger priorities. The most urgent priority is * 0; the least urgent priority is 4294967295. * @param integer $delay Seconds to wait before putting the job in the * ready queue. The job will be in the "delayed" state during this time. * @param integer $ttr Time to run - Number of seconds to allow a worker to * run this job. The minimum ttr is 1. * @param string $data The job body. * @return integer|boolean `false` on error otherwise an integer indicating * the job id. */ public function put($pri, $delay, $ttr, $data) { $this->_write(sprintf("put %d %d %d %d\r\n%s", $pri, $delay, $ttr, strlen($data), $data)); $status = strtok($this->_read(), ' '); switch ($status) { case 'INSERTED': case 'BURIED': return (integer) strtok(' '); // job id case 'EXPECTED_CRLF': case 'JOB_TOO_BIG': default: $this->_error($status); return false; } } /** * The `use` command is for producers. Subsequent put commands will put * jobs into the tube specified by this command. If no use command has * been issued, jobs will be put into the tube named `default`. * * @param string $tube A name at most 200 bytes. It specifies the tube to * use. If the tube does not exist, it will be created. * @return string|boolean `false` on error otherwise the name of the tube. */ public function useTube($tube) { $this->_write(sprintf('use %s', $tube)); $status = strtok($this->_read(), ' '); switch ($status) { case 'USING': return strtok(' '); default: $this->_error($status); return false; } } /** * Pause a tube delaying any new job in it being reserved for a given time. * * @param string $tube The name of the tube to pause. * @param integer $delay Number of seconds to wait before reserving any more * jobs from the queue. * @return boolean `false` on error otherwise `true`. */ public function pauseTube($tube, $delay) { $this->_write(sprintf('pause-tube %s %d', $tube, $delay)); $status = strtok($this->_read(), ' '); switch ($status) { case 'PAUSED': return true; case 'NOT_FOUND': default: $this->_error($status); return false; } } /* Worker Commands */ /** * Reserve a job (with a timeout). * * @param integer $timeout If given specifies number of seconds to wait for * a job. `0` returns immediately. * @return array|false `false` on error otherwise an array holding job id * and body. */ public function reserve($timeout = null) { if (isset($timeout)) { $this->_write(sprintf('reserve-with-timeout %d', $timeout)); } else { $this->_write('reserve'); } $status = strtok($this->_read(), ' '); switch ($status) { case 'RESERVED': return [ 'id' => (integer) strtok(' '), 'body' => $this->_read((integer) strtok(' ')) ]; case 'DEADLINE_SOON': case 'TIMED_OUT': default: $this->_error($status); return false; } } /** * Removes a job from the server entirely. * * @param integer $id The id of the job. * @return boolean `false` on error, `true` on success. */ public function delete($id) { $this->_write(sprintf('delete %d', $id)); $status = $this->_read(); switch ($status) { case 'DELETED': return true; case 'NOT_FOUND': default: $this->_error($status); return false; } } /** * Puts a reserved job back into the ready queue. * * @param integer $id The id of the job. * @param integer $pri Priority to assign to the job. * @param integer $delay Number of seconds to wait before putting the job in the ready queue. * @return boolean `false` on error, `true` on success. */ public function release($id, $pri, $delay) { $this->_write(sprintf('release %d %d %d', $id, $pri, $delay)); $status = $this->_read(); switch ($status) { case 'RELEASED': case 'BURIED': return true; case 'NOT_FOUND': default: $this->_error($status); return false; } } /** * Puts a job into the `buried` state Buried jobs are put into a FIFO * linked list and will not be touched until a client kicks them. * * @param integer $id The id of the job. * @param integer $pri *New* priority to assign to the job. * @return boolean `false` on error, `true` on success. */ public function bury($id, $pri) { $this->_write(sprintf('bury %d %d', $id, $pri)); $status = $this->_read(); switch ($status) { case 'BURIED': return true; case 'NOT_FOUND': default: $this->_error($status); return false; } } /** * Allows a worker to request more time to work on a job. * * @param integer $id The id of the job. * @return boolean `false` on error, `true` on success. */ public function touch($id) { $this->_write(sprintf('touch %d', $id)); $status = $this->_read(); switch ($status) { case 'TOUCHED': return true; case 'NOT_TOUCHED': default: $this->_error($status); return false; } } /** * Adds the named tube to the watch list for the current connection. * * @param string $tube Name of tube to watch. * @return integer|boolean `false` on error otherwise number of tubes in watch list. */ public function watch($tube) { $this->_write(sprintf('watch %s', $tube)); $status = strtok($this->_read(), ' '); switch ($status) { case 'WATCHING': return (integer) strtok(' '); default: $this->_error($status); return false; } } /** * Remove the named tube from the watch list. * * @param string $tube Name of tube to ignore. * @return integer|boolean `false` on error otherwise number of tubes in watch list. */ public function ignore($tube) { $this->_write(sprintf('ignore %s', $tube)); $status = strtok($this->_read(), ' '); switch ($status) { case 'WATCHING': return (integer) strtok(' '); case 'NOT_IGNORED': default: $this->_error($status); return false; } } /* Other Commands */ /** * Inspect a job by its id. * * @param integer $id The id of the job. * @return string|boolean `false` on error otherwise the body of the job. */ public function peek($id) { $this->_write(sprintf('peek %d', $id)); return $this->_peekRead(); } /** * Inspect the next ready job. * * @return string|boolean `false` on error otherwise the body of the job. */ public function peekReady() { $this->_write('peek-ready'); return $this->_peekRead(); } /** * Inspect the job with the shortest delay left. * * @return string|boolean `false` on error otherwise the body of the job. */ public function peekDelayed() { $this->_write('peek-delayed'); return $this->_peekRead(); } /** * Inspect the next job in the list of buried jobs. * * @return string|boolean `false` on error otherwise the body of the job. */ public function peekBuried() { $this->_write('peek-buried'); return $this->_peekRead(); } /** * Handles response for all peek methods. * * @return string|boolean `false` on error otherwise the body of the job. */ protected function _peekRead() { $status = strtok($this->_read(), ' '); switch ($status) { case 'FOUND': return [ 'id' => (integer) strtok(' '), 'body' => $this->_read((integer) strtok(' ')) ]; case 'NOT_FOUND': default: $this->_error($status); return false; } } /** * Moves jobs into the ready queue (applies to the current tube). * * If there are buried jobs those get kicked only otherwise delayed * jobs get kicked. * * @param integer $bound Upper bound on the number of jobs to kick. * @return integer|boolean False on error otherwise number of jobs kicked. */ public function kick($bound) { $this->_write(sprintf('kick %d', $bound)); $status = strtok($this->_read(), ' '); switch ($status) { case 'KICKED': return (integer) strtok(' '); default: $this->_error($status); return false; } } /** * This is a variant of the kick command that operates with a single * job identified by its job id. If the given job id exists and is in a * buried or delayed state, it will be moved to the ready queue of the * the same tube where it currently belongs. * * @param integer $id The job id. * @return boolean `false` on error `true` otherwise. */ public function kickJob($id) { $this->_write(sprintf('kick-job %d', $id)); $status = strtok($this->_read(), ' '); switch ($status) { case 'KICKED': return true; case 'NOT_FOUND': default: $this->_error($status); return false; } } /* Stats Commands */ /** * Gives statistical information about the specified job if it exists. * * @param integer $id The job id. * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary. */ public function statsJob($id) { $this->_write(sprintf('stats-job %d', $id)); return $this->_statsRead(); } /** * Gives statistical information about the specified tube if it exists. * * @param string $tube Name of the tube. * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary. */ public function statsTube($tube) { $this->_write(sprintf('stats-tube %s', $tube)); return $this->_statsRead(); } /** * Gives statistical information about the system as a whole. * * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary. */ public function stats() { $this->_write('stats'); return $this->_statsRead(); } /** * Returns a list of all existing tubes. * * @return string|boolean `false` on error otherwise a string with a yaml formatted list. */ public function listTubes() { $this->_write('list-tubes'); return $this->_statsRead(); } /** * Returns the tube currently being used by the producer. * * @return string|boolean `false` on error otherwise a string with the name of the tube. */ public function listTubeUsed() { $this->_write('list-tube-used'); $status = strtok($this->_read(), ' '); switch ($status) { case 'USING': return strtok(' '); default: $this->_error($status); return false; } } /** * Returns a list of tubes currently being watched by the worker. * * @return string|boolean `false` on error otherwise a string with a yaml formatted list. */ public function listTubesWatched() { $this->_write('list-tubes-watched'); return $this->_statsRead(); } /** * Handles responses for all stat methods. * * @param boolean $decode Whether to decode data before returning it or not. Default is `true`. * @return array|string|boolean `false` on error otherwise statistical data. */ protected function _statsRead($decode = true) { $status = strtok($this->_read(), ' '); switch ($status) { case 'OK': $data = $this->_read((integer) strtok(' ')); return $decode ? $this->_decode($data) : $data; default: $this->_error($status); return false; } } /** * Decodes YAML data. This is a super naive decoder which just works on * a subset of YAML which is commonly returned by beanstalk. * * @param string $data The data in YAML format, can be either a list or a dictionary. * @return array An (associative) array of the converted data. */ protected function _decode($data) { $data = array_slice(explode("\n", $data), 1); $result = []; foreach ($data as $key => $value) { if ($value[0] === '-') { $value = ltrim($value, '- '); } elseif (strpos($value, ':') !== false) { list($key, $value) = explode(':', $value); $value = ltrim($value, ' '); } if (is_numeric($value)) { $value = (integer) $value == $value ? (integer) $value : (float) $value; } $result[$key] = $value; } return $result; } } ?> 以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持中文源码网。